Wireless Pro Game Controller for Switch NS Wireless Controller Gamepad Joystick for Nintend Switch Win 7/ 8/10 Console
1) This Pro controller is compatible with Switch console also supports for Windows PC.
2) Wireless connection, lower interference, stable connecting signal.
3) One-key connecting method for ease of handling.
4) Built-in with 380mAh polymer lithium battery, it can be continuously used for around 5h after fully charged.
5) It supports motion sensing function via built-in Gyro and double-shock function via built-in dual motors.
6) It supports for TURBO function and for amiibo with NFC function.
7) Up to four wireless Pro controllers can be connected to a Switch console simultaneously.
8) It can be used normally even during charging.
9) Ergonomic design and light weight construction make it comfortable even for long hours of continuous gaming.
10) It can be upgraded by update software via connecting it to PC.
2. Key brief introduction
1) HOME key: Power controller on or execute commands from Switch console.
2) D-Pad: Up, down, left and right. It can be easily operated on eight directions.
3) Function control keys: A, B, X, Y. Perfect key design, sensitive and quick for finger operation.
4) Left stick and Right stick: Neoteric 3D stick can be operated precisely on 360° all-round.
5) Functional keys: L1, R1, L2, R2. Trigger and shoulder keys perform quick response function.
6) Screenshot key: Take screenshot and store.
7) TURBO key: First press and hold any key of the functional keys (A/B/X/Y/L1/R1/L2/R2) then press “TURBO” key once to repeat and accelerate action in a game, press “TURBO” key once again to cancel the repeating and accelerating function.
8) Reset key: Short press this key in “RESET” hole to disconnect controller from console and reset the controller.
3. Connection instruction
1) Connecting to Switch Console via wireless
A. Connecting to a Switch console for the first time:
Power on a Switch console, on the main interface of the console click (by using your finger) “Controllers”→”Change Grip/order” to come to pairing mode interface; press “HOME” key and hold for 4s to power a controller on, four LEDs in the controller start blinking slowly and circularly then blinking quickly and circularly after 4s, when one (or more) of the four LEDs is solid bright, it means that the controller is paired with the console successfully; press “B” key to return to the main interface of the console.
B. Connecting to a paired Switch console:
If a controller was paired with a Switch console ever before, just press “HOME” key shortly to power the controller on, the controller will be connected to the console automatically again.
C. Connecting controller back to Switch console:
a. If a controller is in sleeping mode, press “HOME” key shortly to wake it up, it will be connected to the console again automatically.
b. If a Switch console is in sleeping mode, first press the power button of the console to wake the console up then shortly press “HOME” key of the controller to connect it back to the console (If a Switch console is in sleeping mode, the console can’t be woken up by directly pressing any key of the controller.).
2) Connecting to Switch Console via USB cable
On the main interface of a Switch console, click “Settings” → “Controllers and Sensors” → “Pro Controller Wired Communication” → “ON” to open Pro controller wired connection; connect a controller to the USB port of the console holder through a USB cable, LED 4 in the controller starts blinking slowly then LED 1 in the controller will be blinking slowly after the controller is connected to the console.
Note: NFC function instruction
First open amiibo option in the system setting of a Switch console; select amiibo in the special ability in a game; operate according to the corresponding hints in the game; put NFC card close to the center of this controller, the corresponding gaming props will be sensed out.
3) Connecting to Windows PC via USB cable
X-360 driver is required to be downloaded and installed to a Windows PC at first; connect a controller to the Windows PC through a USB cable, four LEDs in the controller start blinking slowly then LED 1 and LED 4 will be blinking slowly after controller driver is installed to the PC automatically and successfully, the controller is ready for use. Games of X-360 mode are supported. X-360 driver can be gotten from internet.
Note: With vibration function but without motion sensing function under X-360 mode wired connection.
4. LED indication description
1) Four LEDs blinking quickly and circularly: This controller is searching for wireless devices to be paired; this controller is connecting back to console via wireless code match.
2) LED(s) solid bright: This controller is connecting to console normally via wireless.
3) LED(s) blinking quickly: This controller battery voltage is lower than 3.6V; if the voltage is lower than 3.4V, the controller will be shut off automatically and can’t be powered on.
4) LED(s) blinking slowly: This controller is connecting to console via USB cable; when this controller is being charged via connecting to a charger, four LEDs are blinking slowly and simultaneously, the four LEDs will be off after fully charged
1 * Wireless Game Controller
1 * Charging Cable